Type to search 60+ products, specs and articles

Stepped shafts, motor shafts and connecting shafts turned on Swiss-type and turn-mill centres. Diameters, chamfers, threads and milled flats finished in one set-up; Ø3 – Ø60, from prototype to small batch.
A 2D drawing with critical tolerances, material and finish is fastest. No drawing? Send a sample and we will measure and draw it first.
These are our standard machining ranges. Longer slender shafts, special threads and unusual geometry are assessed before we quote.
| Item | Detail |
|---|---|
| Processes | Swiss turning / turn-mill / cylindrical grinding |
| Diameter range | Ø3 – Ø60 (longer parts machined in sections) |
| Materials | SUS304 / 316, 45# steel, Alu 6061 / 7075, brass |
| Tolerance | ±0.02 mm; down to ±0.01 mm on critical features |
| Surface finish | Ra 0.8 – 1.6 (Ra 0.4 when ground) |
| Features | Steps, chamfers, threads, milled flats, holes, knurls, keyways |
| Sampling | 3–7 days with a first-article inspection report |
| Batch size | From one piece; 10–15 days for medium batches |
Heat treatment and finishing — black oxide, nickel, anodising — are handled in-house, so there is no second supplier in the chain. For slender shafts, state the permitted bow and runout; otherwise standard practice applies.
Motor shafts, drive parts and the shafting inside office and automation equipment are mostly turned parts like these.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.