Type to search 60+ products, specs and articles

An aluminium hex standoff with an M6×0.5 male thread at one end and an internal thread in the body at the other: the male end screws into the panel or base, the female end takes a screw or a second standoff. 35 mm of thread, 10 mm body, natural finish, at about a third of the weight of the same part in steel.
Model code: M6*35+10 — M6 thread, 35 mm of male thread, 10 mm body. The figure before the plus is thread, after it is body.
M6×35+10 is the stocked size; other lengths, threads and across-flats are machined to drawing, minimum quantity quoted separately.
| Item | Detail |
|---|---|
| Size | M6 × 35 + 10 |
| Thread | M6, 0.5 mm pitch (fine) |
| Male thread length | 35 mm |
| Body length | 10 mm |
| Construction | Male thread one end, internal thread the other (male-female / single pass) |
| Material | Aluminium alloy |
| Across flats | 10 mm |
| Finish | Natural; anodised on request |
| Tolerance | Length ±0.1 mm; thread 6g / 6H |
| MOQ / lead time | 50 pcs; 1–2 days ex stock, 5–7 days made to order |
Do not pair an aluminium standoff with a stainless screw for the long term: the galvanic gap between the two metals corrodes the thread once moisture gets in. Outdoors, use an aluminium screw or a jointing compound. On anodised parts, avoid scoring the film when tightening.
Other standoffs in the same range:
Structural spacing where weight and appearance both count, and steel would be the heavier answer.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.