Type to search 60+ products, specs and articles

Single-ended brass spacer for PCB and chassis mounting. External thread on one end, internal on the other, so they stack to any height; the hex flats take a wrench without slipping. M2 – M5 from stock, lengths cut to the millimetre.
Model code: M3*10+6 means M3 thread, 10 mm hex body, 6 mm external thread.
For any thread diameter, body height H and external thread length L combine freely. The table shows stocked ranges; anything outside is made to order.
Swipe to see all columns →
| Thread D/d | Height H (mm) | Thread L (mm) | Thread pitch P (mm) | Parallel edge N (mm) |
|---|---|---|---|---|
| M2.0 | 2.0 – 35 | 3 / 4 | 0.4 | 3.0 |
| M2.5 | 4.0 – 40 | 3 / 4 / 5 / 6 | 0.45 | 4.6 |
| M3.0 | 4.0 – 100 | 2.5 / 3 / 4 / 5 / 6 / 8 | 0.5 | 4.6 |
| M4.0 | 5.0 – 70 | 6 | 0.7 | 6.0 |
| M5.0 | 8.0 – 80 | 6 | 0.8 | 7.0 |
Internal thread can be through or blind — specify when ordering. Non-standard lengths only need H and L, no tooling charge. Nickel plating is available for oxidation resistance and a stainless-like look.
Other standoffs in the same range:
Board support, chassis mounting and module spacing are the three common uses — matching screws can be quoted in the same enquiry.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.