+86 159 0592 6913 WhatsApp sales@jhsyfastener.com Mon – Sat 08:30 – 18:00 (GMT+8)
中文
Get a Quote
Home/Products/Standoffs/304 stainless hex standoff
In stock · M2 – M3, L 3–100

304 Stainless Hex Standoff, Through (Long)

A 304 stainless hex standoff with an internal thread through both ends, made up to 100 mm in M3 for long spans between chassis, motherboard and frame. 87 stocked sizes across M2, M2.5 and M3; M3 comes in two across-flats sizes, 4.75 and 5.0 mm.

  • M2 – M3
  • SUS304
  • L 3 – 100 mm
  • Through / long
Material
Stainless steel 304 (SUS304)
Finish
Natural; electropolished or passivated on request
Availability
87 stocked sizes ready to ship
Lead time
1–2 days ex stock; 5–7 days made to order
Packing
Bags or cartons, split to your count

Model code: M3*50 — M3 internal thread, 50 mm body. A prefix such as H4.75 or H5 states the across-flats size.

No rustThe 304 body resists corrosion, so nothing creeps out of the thread indoors, in damp rooms or after washing.
Up to 100 mmMost standoffs stop at 30 – 40 mm; this M3 range runs to 100 mm, so a wide span needs no stacking.
Two across-flatsM3 is stocked at 4.75 and 5.0 mm: 4.75 for standard holes, 5.0 where you want a larger wrench face or more torque resistance.
Through-threadedInternal thread at both ends — a screw from each side, with cables still passing between them.
RigidThe stainless body takes clamping load without splitting or stripping.
Fine steps1 mm steps from 3 to 25 mm and 5 mm steps above, so half a millimetre never forces a redesign.
Made to orderM4 – M8, special lengths and across-flats machined to drawing.
Need samples?5–10 pcs free to try, freight collect.Request samples
Specifications

Thread, length and across-flats

87 sizes across three threads. M3 is split into two groups by across-flats, so check the hole and the wrench clearance first.

ItemDetail
Thread rangeM2 / M2.5 / M3 from stock; M4 – M8 made to order
Length rangeM2: 3 – 25 mm (15 sizes); M2.5: 3 – 25 mm (16 sizes)
M3 length4.75 A/F: 5 – 100 mm (31 sizes); 5.0 A/F: 4 – 60 mm (25 sizes)
ConstructionHex body, internal thread through both ends
MaterialStainless steel 304 (SUS304)
FinishNatural; electropolished or passivated on request
ThreadMetric coarse, mating with standard machine screws
ToleranceLength ±0.1 mm; across flats ±0.05 mm
PackingBags or cartons, split to your count
Lead time1–2 days ex stock; 5–7 days made to order
How to read the model code
The code reads across-flats · thread × body length — H4.75 M3*50 is 4.75 mm across flats, M3 internal thread and a 50 mm body. Where no H prefix is given, the standard across-flats applies.

On long standoffs straightness is harder to hold than length: above 60 mm, state the permitted bow on the drawing. Do not drive both screws home at once when clamping, or the body bows; where a long span needs more rigidity, use a turned stepped post instead.

Applications

Where it is used

Wide spans in damp or washed environments, where carbon steel would need plating that you would rather not specify.

Send us your drawing — quotation within 24 hours

Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.

Home Products Get a Quote