+86 159 0592 6913 WhatsApp sales@jhsyfastener.com Mon – Sat 08:30 – 18:00 (GMT+8)
中文
Get a Quote
Home/Products/Standoffs/Carbon steel hex standoff, zinc
In stock · M3 – M8, L 5–100

Carbon Steel Hex Standoff, Blue-White Zinc

A Q235 carbon steel hex standoff with an internal thread through both ends and blue-white zinc plating. For chassis, cabinets and distribution boxes built in volume, where stainless is more corrosion resistance than the job needs, it is the cheapest standoff that still holds: five threads from M3 to M8, 100 stocked lengths from 5 to 100 mm.

  • M3 – M8
  • Q235 carbon steel
  • L 5 – 100 mm
  • Blue-white zinc
Material
Q235 carbon steel
Finish
Blue-white zinc (zinc + passivation)
Availability
100 stocked sizes ready to ship
Lead time
1–2 days ex stock; 5–7 days made to order
Packing
Bags or cartons, split to your count

Model code: M4*25 — M4 internal thread, 25 mm body. The suffix states the plating, for example blue zinc.

Low costMore than half the price of stainless at the same size — the line that matters on a high-volume chassis.
Strong enoughThe carbon steel body takes more tightening torque than brass and does not strip on repeated assembly.
Plated inside tooBarrel-plated blue-white zinc reaches the thread flanks, so rust does not start at the thread mouth.
Widest range100 sizes across M3 – M8: nearly every length from 5 to 100 mm ships from stock.
InterchangeableMates with standard M3 – M8 machine screws, so a hole pattern does not change when you switch from an imported part.
Plating optionsNickel or zinc-flake coating for harsher corrosion specs, 2–3 days extra.
Volume pricingOrders in the 100k range can run on a dedicated die, at a lower unit price.
Need samples?5–10 pcs free to try, freight collect.Request samples
Specifications

Thread, length and plating

100 sizes across five threads: 1 – 2 mm steps at the short end, 5 mm steps above.

ItemDetail
Thread rangeM3 / M4 / M5 / M6 / M8
Length range · M3 / M4M3: 5 – 100 (23 sizes); M4: 6 – 100 (21 sizes)
Length range · M5 – M8M5 / M6: 10 – 100 (19 each); M8: 10 – 95 (18 sizes)
ConstructionHex body, internal thread through both ends
MaterialQ235 carbon steel
FinishBlue-white zinc; nickel or zinc-flake on request
ThreadMetric coarse
StandardGB900-1988, grade B
ToleranceLength ±0.2 mm; across flats ±0.1 mm
Lead time1–2 days ex stock; 5–7 days made to order
How to read the model code
The code reads thread × body length — M4*25 is an M4 internal thread with a 25 mm body. A suffix names the colour or plating, such as blue zinc.

How long the zinc lasts depends on coating thickness and environment; 24 h salt spray is the normal level for this class of part. Outdoors or in high humidity, specify nickel or stainless instead. Cut or turned ends carry no plating and rust from the cut first, so state whether cut lengths need re-plating.

Applications

Where it is used

Volume board and cabinet support where the environment is not severe and cost drives the choice.

Send us your drawing — quotation within 24 hours

Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.

Home Products Get a Quote