Type to search 60+ products, specs and articles

A nylon hex standoff with an internal thread through both ends: it holds the board, panel or module at a fixed spacing and breaks the electrical path between the two screws. M2 and M2.5, 4 – 30 mm, 28 stocked sizes in white PA66, black made to order.
Model code: M2.5*10 — M2.5 internal thread, 10 mm body length. On nylon standoffs the figure is the full length of the part, not the thread length.
28 sizes stocked across two threads. M3 – M5 and non-standard lengths are moulded or machined to drawing, minimum quantity quoted separately.
| Item | Detail |
|---|---|
| Thread range | M2 / M2.5 from stock; M3 – M5 made to order |
| Length range | M2: 4 – 30 mm (15 sizes); M2.5: 4 – 20 mm (13 sizes) |
| Construction | Hex body, internal thread through both ends |
| Material | Nylon PA66 |
| Colour | White from stock; black made to order |
| Across flats | Matched to the thread size, or to your drawing |
| Temperature | -40 – 105 °C (120 °C short term) |
| Tolerance | Length ±0.2 mm; across flats ±0.1 mm |
| Packing | Bags or cartons, split to your count |
| Lead time | 1–2 days ex stock; 5–7 days made to order |
A nylon standoff holds by thread engagement, so tighten it less than a metal part — overtightening strips the thread. Where the joint is taken apart often or carries load, use brass or aluminium instead; above 105 °C, change material as well.
Other standoffs in the same range:
Board-level spacing where metal must not carry current or heat from one side to the other.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.