Type to search 60+ products, specs and articles

Pressed into a sheet-metal hole and done — no tapping, no welding. The hex flange bites into the panel to stop rotation, and the blind thread stays closed so dust, solder and paint cannot creep in from behind. 45# steel, zinc-plated, M4 thread, 3 – 25 mm in 31 stocked lengths.
Model code: SOO-3.5M4-6 — 3.5 mm body diameter, M4 thread, 6 mm long.
M4 is the standard stocked thread, in 0.5 mm length steps from 3 to 25 mm. Other threads, and stainless or aluminium bodies, are made to drawing.
| Item | Detail |
|---|---|
| Thread range | M4 from stock; M2.5 / M3 / M5 / M6 / M8 made to order |
| Body diameter | 3.5 mm (SOO-3.5M4 series) |
| Length L | 3 – 25 mm in 0.5 mm steps, 31 sizes |
| Body | Cylindrical body with hex flange and a blind internal thread |
| Material | Carbon steel 45# (SUS304 or aluminium on request) |
| Finish | Zinc-plated (black oxide or nickel on request) |
| Installation | Clinched (squeeze) with a dedicated anvil and press setting |
| Sheet thickness | 0.8 – 3.0 mm CRS, galvanised or aluminium; hole size follows thickness |
| Tolerance | ±0.1 mm; critical dimensions to drawing |
| Lead time | 1–2 days ex stock; 5–7 days made to order |
Hole size follows sheet thickness and material, and 0.1 mm too large costs you the torque spec. For a first run, send a piece of your panel and we will press a trial batch to confirm hole size and press setting. Stainless or aluminium bodies, and longer lengths, are quoted from drawing.
Other standoffs in the same range:
Any sheet-metal part that needs a serviceable thread, where welding a nut or tapping the panel is awkward, is a candidate.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.