+86 159 0592 6913 WhatsApp sales@jhsyfastener.com Mon – Sat 08:30 – 18:00 (GMT+8)
中文
Get a Quote
Home/Products/Standoffs/SMT welding post (round pin)
In stock · M2.5 – M3, L 4–12

SMT Welding Post — Round Pin

A round brass post spot-welded straight onto the PCB. The boss on the base is welded to the pad, the body carries an internal thread, and the module is screwed down after reflow. M2.5 and M3, heights 4 – 12 mm, 19 stocked sizes, nickel-plated brass.

  • M2.5 / M3
  • Nickel-plated brass
  • L 4 – 12 mm
  • Spot-welded / tape available
Material
Brass, nickel-plated
Finish
Nickel (gold or tin on request)
Availability
19 stocked sizes ready to ship
Lead time
1–2 days ex stock; 5–7 days made to order
Packing
Bulk, or taped to suit your placement machine

Model code: M2.5*4+1 — M2.5 internal thread, 4 mm body height, and a 1 mm weld boss. Both height and boss can be made to drawing.

Solid weldThe boss sits flat on the pad, so pull strength after spot welding stays consistent through wave soldering.
Thread accuracy6H internal thread — M2.5 and M3 machine screws run in without binding.
Dense size rangeNine heights for M2.5 and ten for M3, 4 – 12 mm in 1 mm steps, so a 0.5 mm change never forces a board revision.
Even platingBarrel-plated nickel of consistent thickness; solderability and salt spray sampled by batch.
Stock heldAll 19 sizes kept year-round, so top-up orders never stall a build.
Tape on requestVolume orders can be supplied on tape for direct feeder loading.
200+ Buyers ServedSupplying 200+ OEMs, module makers and EMS companies.
Need samples?5–10 pcs free for a trial weld, freight collect.Request samples
Specifications

Thread, height and weld boss

Within a thread size the body height steps in 1 mm increments. The table lists stocked sizes and construction details; anything outside is made to drawing.

ItemDetail
Thread rangeM2.5 / M3 (6H internal thread)
Body height H4 – 12 mm in 1 mm steps
Weld boss1 mm standard (the +1 in the code), adjustable to drawing
BodyRound body with a welding boss on the base, through internal thread
MaterialBrass, nickel-plated (gold or tin on request)
Stocked sizes9 sizes in M2.5; 10 in M3, including 4.6 mm
WeldingSpot or stored-energy welding with a dedicated electrode
Tolerance±0.05 mm; critical dimensions to drawing
PackingBulk or taped to suit the placement machine
Lead time1–2 days ex stock; 5–7 days made to order
How to read the model code
The code reads thread × body height + boss height — M2.5*4+1 is an M2.5 internal thread, a 4 mm body and a 1 mm weld boss.

This is a welded part, not a press-fit part — the boss is fused to the pad, so the pad should be at least 1.2× the body diameter. For boards that see two reflow passes, or pads that are on the small side, send a sample and weld a trial batch first.

Applications

Where it is used

Wherever a board needs a threaded stand-off and press-fitting or hand-soldering a nut is not an option, the post is welded on directly.

Send us your drawing — quotation within 24 hours

Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.

Home Products Get a Quote