Type to search 60+ products, specs and articles

Pressed into a punched hole and it stays there — no tapping, no welding. The knurled flange sits close to flush, the knurl bites the hole wall against torque and the flange carries the pull-out load. CLS range from M2 to M12 in ten thread sizes, all 304 stainless for outdoor and wash-down equipment.
To specify: thread × sheet thickness + head style. Drill the hole to the CLS size — oversize and it spins, undersize and it will not seat. For stainless sheet use the SP series instead.
Dimensions follow the standard CLS series; shank codes 0 / 1 / 2 cover different sheet thicknesses. Confirm against sample or drawing before release.
| Thread | Hole φA (mm) | OD C (mm) | Height E (mm) | Sheet (mm) |
|---|---|---|---|---|
| M2 × 0.4 | 4.22 | 6.35 | 1.5 | 0.8 – 1.4 |
| M2.5 × 0.45 | 4.22 | 6.35 | 1.5 | 0.8 – 1.4 |
| M3 × 0.5 | 4.22 | 6.35 | 1.5 | 0.8 – 1.4 |
| M3.5 × 0.6 | 4.73 | 7.11 | 1.5 | 1.0 – 1.4 |
| M4 × 0.7 | 5.38 | 7.87 | 2.0 | 0.8 – 1.4 |
| M5 × 0.8 | 6.33 | 8.64 | 2.0 | 1.0 – 1.4 |
| M6 × 1.0 | 8.72 | 11.18 | 4.08 | 0.9 – 2.3 |
| M8 × 1.25 | 10.47 | 12.70 | 5.47 | 1.4 – 2.3 |
| M10 × 1.5 | 13.97 | 17.35 | 7.48 | 2.3 – 3.2 |
| M12 × 1.75 | 16.95 | 20.57 | 8.50 | 3.2 – 6.0 |
Hole size is not negotiable — oversize and the nut spins, undersize and it will not press in. For stainless or harder sheet above HRB 70 use the SP series; CLS suits cold-rolled steel, aluminium and some brass.
Other panel fasteners in the range:
Wherever a thin panel needs a dependable thread and only one face is accessible.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.