Type to search 60+ products, specs and articles

A rivet nut with a fully stainless body. The flat head sits on the sheet, the knurled body bulges behind it and clamps the panel, all from one side; 304 keeps it rust-free outdoors, in wet areas and through wash-down. M4 to M12 from stock, small and large countersunk heads to order.
To specify: thread × sheet thickness + head style. Stainless needs more pull than carbon steel — on sheet under 1 mm, set a sample first.
Body length is chosen against sheet thickness; the table shows the stocked range, with head style and length made to drawing.
| Item | Detail |
|---|---|
| Thread range | M4 / M5 / M6 / M8 / M10 / M12 |
| Material | SUS304 throughout (zinc-plated carbon steel available) |
| Head | Flat (small or large countersunk on request) |
| Body | Knurled cylinder, bulges to clamp the sheet |
| Sheet thickness | 0.5 – 4.0 mm, matched to size and body length |
| Installation | One-side setting with a rivet-nut tool and the matching nose |
| Finish | Natural, passivation on request |
| Tolerance | Thread 6H; critical dimensions to drawing |
| Packing | Bulk / bagged, counted to order |
| Lead time | 1–2 days ex stock; 5–7 days made to order |
Sheet thickness sets the body length: too long and it bottoms out, too short and it will not hold. Stainless needs a higher setting force than carbon steel — use a long-handle, air or hydraulic tool, and set a sample on sheet under 1 mm before releasing the batch.
Other panel nuts in the range:
Outdoor, wet or wash-down sheet structures where a welded nut would rust or distort the panel.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.