Type to search 60+ products, specs and articles

A thread for sheet metal that installs from one side. Push it through, the tool upsets the body and clamps both faces; the knurled body stops it spinning, the flat head sits against the surface. Zinc-plated carbon steel from stock, SUS304 on request.
To specify: thread × sheet thickness + material and finish. For example M6 in 1.5 mm cold-rolled sheet.
For any thread diameter, body length follows the sheet thickness and the head follows the look you want. Stocked ranges below; other thicknesses made to drawing.
| Item | Detail |
|---|---|
| Thread range | M3 – M10 (wider on drawing) |
| Head / body | Flat or countersunk head; knurled body |
| Material | Carbon steel (SUS304 or aluminium on request) |
| Finish | Zinc-plated (blue-white zinc optional) |
| Sheet thickness | Matched to your panel — tell us the thickness |
| Installation | Single-side with a rivet nut tool; no welding |
| Packing | Bulk or bagged, mixed batches counted |
| Lead time | 1–2 days ex stock; 5–7 days made to order |
Sheet thickness decides the body length — too long and it bottoms out, too short and it will not clamp. On panels under 1 mm, set a sample first. For outdoor work such as cabinets and charging stations, switch to a stainless body.
Other panel nuts in the range:
Anywhere a thin panel needs a thread and the back face is out of reach.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.