Type to search 60+ products, specs and articles

Brass nuts for moulded-in installation. Straight-knurled or diamond body, pressed in hot or set with ultrasonics; once the plastic cools, the knurl takes the torque and the pull-out load. Through, blind and double-ended bodies, M1 – M10 from stock.
Three things decide the part: the plastic, the hole size in the moulding, and the torque you need. Send those and we will match the insert.
For any thread diameter the body length, outside diameter and knurl pattern combine freely. The table shows stocked ranges; special hole layouts are made to drawing.
| Item | Detail |
|---|---|
| Thread range | M1 – M10 (M2 / M2.5 / M3 / M3.5 / M4 / M5 / M6 / M8 from stock) |
| Body styles | Straight knurled / diamond; through, blind or double-ended |
| Material | Brass C3604 (H59 on request) |
| Finish | Natural; nickel plating available |
| Tolerance | ±0.05 mm; critical dimensions to drawing |
| Plastics | ABS / PC / PA66 / PBT / POM |
| Installation | Heat-staked or ultrasonic insertion |
| Packing | Bulk or tape-and-reel, mixed batches counted |
Diamond knurl resists more torque; straight knurl suits thin walls. The hole tolerance in the moulding often matters more than the insert itself — our engineers can check the hole and press depth with you before tooling.
Same family, other knurls and alloys:
Any plastic part that has to take a screw uses a moulded-in insert — housings, connectors and power modules most of all.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.