Type to search 60+ products, specs and articles

Small brass inserts heat-staked into mouldings. The body carries a helical knurl: once the plastic flows into the teeth the insert is held against rotation in every direction, and the through bore lets a screw pass right through. H62 brass to GB/T809, 56 stocked sizes from M1.4 to M5, heights 1.5 – 10 mm and outside diameters 2.3 – 7 mm.
Model code: thread × height × outside diameter, e.g. M2*3*3.5. Send those three numbers and we can quote.
The table lists every size we hold, grouped by thread. Within a thread, height and outside diameter can be selected as needed; sizes not listed are made to order.
Swipe to see all columns →
| Thread Φ | Height L (mm) | Outside dia. F (mm) | Thread pitch P (mm) |
|---|---|---|---|
| M1.4 | 1.5 | 2.3 | 0.30 |
| M1.4 | 1.8 | 2.3 | 0.30 |
| M1.4 | 2 | 2.3 | 0.30 |
| M1.4 | 2.5 | 2.3 | 0.30 |
| M1.4 | 3 | 2.3 | 0.30 |
| M1.4 | 3.5 | 2.3 | 0.30 |
| M1.4 | 4 | 2.3 | 0.30 |
| M1.4 | 2 | 2.5 | 0.30 |
| M1.4 | 2.5 | 2.5 | 0.30 |
| M1.4 | 3 | 2.5 | 0.30 |
| M1.6 | 2 | 2.5 | 0.35 |
| M1.6 | 3 | 2.5 | 0.35 |
| M1.6 | 4 | 2.5 | 0.35 |
| M2 | 2 | 3.0 | 0.40 |
| M2 | 2.5 | 3.0 | 0.40 |
| M2 | 3 | 3.0 | 0.40 |
| M2 | 4 | 3.0 | 0.40 |
| M2 | 4.5 | 3.0 | 0.40 |
| M2 | 5 | 3.0 | 0.40 |
| M2 | 6 | 3.0 | 0.40 |
| M2 | 2 | 3.2 | 0.40 |
| M2 | 2.5 | 3.2 | 0.40 |
| M2 | 3 | 3.2 | 0.40 |
| M2 | 4 | 3.2 | 0.40 |
| M2 | 5 | 3.2 | 0.40 |
| M2 | 6 | 3.2 | 0.40 |
| M2 | 2 | 3.5 | 0.40 |
| M2 | 2.5 | 3.5 | 0.40 |
| M2 | 3 | 3.5 | 0.40 |
| M2 | 3.5 | 3.5 | 0.40 |
| M2 | 4 | 3.5 | 0.40 |
| M2 | 5 | 3.5 | 0.40 |
| M2 | 6 | 3.5 | 0.40 |
| M3 | 2.5 | 4.5 | 0.50 |
| M3 | 3.5 | 4.5 | 0.50 |
| M3 | 4 | 4.5 | 0.50 |
| M3 | 4.5 | 4.5 | 0.50 |
| M3 | 5 | 4.5 | 0.50 |
| M3 | 6 | 4.5 | 0.50 |
| M3 | 3 | 5.0 | 0.50 |
| M3 | 4 | 5.0 | 0.50 |
| M3 | 5 | 5.0 | 0.50 |
| M3 | 6 | 5.0 | 0.50 |
| M3 | 8 | 5.0 | 0.50 |
| M3 | 10 | 5.0 | 0.50 |
| M4 | 4 | 5.5 | 0.70 |
| M4 | 5 | 5.5 | 0.70 |
| M4 | 6 | 5.5 | 0.70 |
| M4 | 8 | 5.5 | 0.70 |
| M4 | 5 | 6.0 | 0.70 |
| M4 | 6 | 6.0 | 0.70 |
| M4 | 8 | 6.0 | 0.70 |
| M4 | 10 | 6.0 | 0.70 |
| M5 | 5 | 7.0 | 0.80 |
| M5 | 6 | 7.0 | 0.80 |
| M5 | 8 | 7.0 | 0.80 |
The helical knurl suits small mouldings that have to take a higher tightening torque; thin-walled parts can use the straight-knurled body instead — we make both. The hole size in the moulding usually affects grip more than the nut itself, so send a sample and we will test the press fit with you.
Same family, other knurls and alloys:
Any small plastic part that has to take a screw more than once uses a moulded-in nut — earbuds, wearables, connectors and micro power supplies most of all.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.