Type to search 60+ products, specs and articles

Brass insert nut for moulded-in installation. The straight-knurled body is pressed into the hole in the moulding; once the plastic cools, the knurl takes the torque and the pull-out load. Through bore, so a screw passes right through. H59 brass to GB809, 14 thread sizes from M1 to M10, height and outside diameter combined to order.
Model code: thread × height × outside diameter, e.g. M3*5*4.5. Send those three numbers and we can quote.
For any thread diameter, height L and outside diameter F combine freely. The table shows stocked ranges; other diameters and lengths are made to order.
Swipe to see all columns →
| Thread Φ | Height L (mm) | Outside dia. F (mm) | Thread pitch P (mm) |
|---|---|---|---|
| M1.0 | 1.5 – 2.5 | 2.0 | 0.20 |
| M1.2 | 1.5 – 2.5 | 2.0 | 0.20 |
| M1.4 | 1.5 – 6.0 | 2.3 | 0.25 |
| M1.6 | 2.0 – 6.0 | 2.5 | 0.30 |
| M1.7 | 2.0 – 6.0 | 2.5 | 0.35 |
| M2.0 | 2.0 – 12.0 | 3.0 – 4.0 | 0.40 |
| M2.5 | 3.0 – 12.0 | 3.5 – 4.5 | 0.45 |
| M3.0 | 3.0 – 30.0 | 4.0 – 6.0 | 0.50 |
| M3.5 | 4.0 – 10.0 | 5.0 | 0.60 |
| M4.0 | 4.0 – 30.0 | 5.0 – 7.0 | 0.70 |
| M5.0 | 3.0 – 30.0 | 6.5 – 8.0 | 0.80 |
| M6.0 | 4.0 – 30.0 | 8.0 – 10.0 | 1.00 |
| M8.0 | 5.0 – 30.0 | 10.0 – 12.0 | 1.25 |
| M10 | 5.0 – 25.0 | 12.0 | 1.50 |
The through bore suits a screw passed right through and locked with a nut; blind, single-ended or flanged versions are made to drawing. The hole size in the moulding usually affects grip more than the nut itself — send a sample and we will test the press fit with you.
Same family, other knurls and alloys:
Any plastic part that has to take a screw more than once uses a moulded-in nut — housings, connectors and power modules most of all.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.