Type to search 60+ products, specs and articles

Board-level nuts that go through reflow, supplied on tape for the pick-and-place line. A round boss centres the part and the flat base sits on the pad; 118 stocked sizes in M2 – M3, with a locating-peg option. M4 / M5 sizes are on the SMT-SO carrier page.
Part code: M2*φ4*2+φ2.5*1.5 — M2 thread × φ4 body × 2 mm body height + φ2.5 boss × 1.5 mm.
Body OD, body height and boss combine freely within a thread; the table merges 118 stocked sizes by outside diameter. Carrier tape is made to suit your machine.
| Thread | Body OD φD (mm) | Body height H (mm) | Boss φd × h (mm) | Sizes |
|---|---|---|---|---|
| M2 | φ3.5 | 1 | φ2.5 × 1 | 1 |
| M2 | φ4 | 0.5 – 12 | φ2.5 – 3 × 1 – 1.5 | 39 |
| M2 | φ4.4 | 1.5 | φ3 × 1.5 | 1 |
| M2 | φ4.5 | 0.8 – 2.5 | φ2.9 × 1.5 | 2 |
| M2 | φ5 | 3.5 | φ2.9 × 1.5 | 2 |
| M2 | φ5.5 | 1 – 6.5 | φ3 – 3.6 × 1.5 | 11 |
| M2.5 | φ4.5 | 1 – 20 | φ3 – 3.2 × 1.2 – 1.6 | 21 |
| M2.5 | φ5 | 6.3 – 15 | φ3.2 × 1.5 | 2 |
| M2.5 | φ5.5 | 0.5 – 7 | φ3.6 – 4 × 1.5 | 13 |
| M3 | φ5.5 | 0.5 – 10 | φ3.5 – 4.5 × 1.5 – 2 | 25 |
| M3 | φ6 | 3.1 | φ4.5 × 2 | 1 |
Plain tape-and-reel costs less than SMT-SO carrier and covers most board-level fixing. If the board goes through two reflow passes or the pads are small, ask for a sample run first.
Other SMT parts in the range:
Wherever a board needs a thread but has to run through SMT — it replaces hand-swaged and post-soldered nuts.
Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.