+86 159 0592 6913 WhatsApp sales@jhsyfastener.com Mon – Sat 08:30 – 18:00 (GMT+8)
中文
Get a Quote
Home/Products/Nuts/SMT-SO tape-and-reel brass nut
In stock · M2 – M5, 139 sizes

SMT-SO Tape-and-Reel Brass Nut

The carrier-tape version of the board-level nut. The boss centres itself in the PCB hole, the flat base solders to the pad in reflow, and the nozzle picks one part at a time without dropping it. M2 to M5, body OD φ3.5 – φ8.5, 139 stocked sizes in nickel-plated and plain brass.

  • M2 / M2.5 / M3 / M4 / M5
  • Nickel-plated / plain brass
  • Tape and reel
  • 139 stocked sizes
Material
Brass (plain, nickel or tin plated)
Finish
Nickel (tin or plain brass on request)
Availability
139 stocked sizes ready to ship
Lead time
1–2 days ex stock; 5–7 days made to order
Packing
Tape and reel, wound to your feeder width

Part code: M3*φ5.5*2+φ4*1.5 — M3 thread × φ5.5 body × 2 mm body height + φ4 boss × 1.5 mm. The boss sets the PCB hole.

Straight onto the lineEven pocket pitch means the nozzle picks true and the throw-away rate stays low — no re-traying.
Boss centres itselfThe boss drops into the PCB hole, so placement offset is small and the part does not drift in reflow.
Solid jointFlat base plus uniform nickel wets the pad evenly through the reflow profile.
Up to 24 mmM3 bodies go to 24 mm, so board-to-board spacing no longer needs stacked spacers.
Plain brass optionUnplated brass costs less and suits internal structures that stay hidden after soldering.
From one reelStocked sizes ship from a single reel — prototype runs and volume lines both work.
200+ Buyers ServedSupplying 200+ OEMs, module makers and EMS companies.
Need samples?A short length of tape free for a trial run, freight collect.Request samples
Specifications

Thread, outside diameter and boss

The table merges sizes by thread and outside diameter — 139 in total. Body height and boss combine within each line; blind-hole and unthreaded bush variants are quoted separately.

ThreadBody OD φD (mm)Body height H (mm)Boss φd × h (mm)Sizes
M2φ3.51 – 3φ2.5 × 1 – 22
M2φ40.5 – 12φ2.35 – 3 × 1 – 1.532
M2φ4.41.5 – 10.5φ2.8 – 3 × 1.4 – 1.52
M2φ4.50.8 – 8φ2.75 – 3 × 0.5 – 3.16
M2φ53.5φ2.9 × 1.51
M2φ5.51 – 6.5φ3 – 3.6 × 1.512
M2.5φ4.51 – 10φ3 – 3.2 × 1.2 – 1.618
M2.5φ5.54 – 5φ3.6 × 1.52
M2.5φ6.52.8φ4.2 × 32
M3φ55φ3.8 × 1.61
M3φ5.51 – 24φ2.8 – 4.5 × 1 – 340
M3φ63.1φ4.5 × 21
M3φ6.56φ4.1 × 1.51
M4φ72 – 20φ4.5 × 1.5 – 216
M4φ8.55 – 8φ6.15 × 1.42
M5φ73φ5.5 × 2.51
How to specify
The code reads thread × body OD × body height + boss OD × boss height: M3*φ5.5*2+φ4*1.5 is M3 thread, φ5.5 body 2 mm high, φ4 boss 1.5 mm high.

Tape width, reel diameter and quantity per reel are confirmed against your placement machine — 12 mm tape suits a standard feeder. For boards that see two reflow passes or have small pads, run a sample first. Blind-hole and unthreaded bush variants exist — note them on the enquiry.

Applications

Where it is used

Wherever a board needs a thread but has to run through SMT — it replaces hand-swaged and post-soldered nuts.

Send us your drawing — quotation within 24 hours

Custom work to drawing or sample is welcome, and we are happy to send samples for testing first. Leave your contact and an engineer will reply directly.

Home Products Get a Quote